Got Something You Want To Say?

Oh yeah, since I know you that's why!!!! :hehe:

RedRum may be a tad jealous though..... :sweat:

ahochaude wrote:Oh yeah, since I know you that's why!!!! :hehe:

RedRum may be a tad jealous though..... :sweat:

lol, I thought he was just an eriko imai fan too :hehe:

Oh no,. he's all over Uehara Takako.

He likes SPEED, but Uehara Takako is his all time fav.

ahochaude wrote:Oh no,. he's all over Uehara Takako.

He likes SPEED, but Uehara Takako is his all time fav.

Hahaha, yea she's quite popular. Last I heard she was dating Issa from Da Pump, but I think they broke up. Oh well, I could always settle for Hiro too :hehe:

Issa is a fag.

Ask Niko, he'll tell you.

ahochaude wrote:Issa is a fag.

Ask Niko, he'll tell you.

AHAHAHAHA, yea he keeps stealing our girls! :mad:

eltinator wrote:AHAHAHAHA, yea he keeps stealing our girls! :mad:

Yes he does!!!! Hairy Okinawan bastard!!!

Oh wait, I'm hairy and I'm Okinawan too....... :beaten: :beaten:

ahochaude wrote:

Yes he does!!!! Hairy Okinawan bastard!!!

Oh wait, I'm hairy and I'm Okinawan too....... :beaten: :beaten:

LMAO, he's stealing your thunder man!! :hehe:

I got younger Mojo.......

That's all you need!!!!! :hehe: :hehe: :hehe:

My DVD burner is f$%&ed up!!!!!!!!!!!!!!!!!! :beatyou: :banghead: :doh: :grumble: :angry: I'm so mad about it and frustrated, that I can't even get into the issues behind it, especially since I cannot find and fix the root of the problem. This thing is only 4 months old, so if it's dying, I'll be making some enemies. :boxing:

I'm clueless about this though.......aahhh fork it I'm going to sleep now :hehe: :bonk: I've been up all night with this and nothing is fixed, and it may even be worse! :cursing: So I must rest what few little semi-useful brain cells I have left :rolly: . I've already been trying to figure this out for a couple days now. I think I ended up with a cruddy burner. :grumble:

KouSeiya315 wrote:My DVD burner is f$%&ed up!!!!!!!!!!!!!!!!!! :beatyou: :banghead: :doh: :grumble: :angry: I'm so mad about it and frustrated, that I can't even get into the issues behind it, especially since I cannot find and fix the root of the problem. This thing is only 4 months old, so if it's dying, I'll be making some enemies. :boxing:

that sucks! well, u can still send it on RMA though right...

KouSeiya315 wrote:My DVD burner is f$%&ed up!!!!!!!!!!!!!!!!!! :beatyou: :banghead: :doh: :grumble: :angry: I'm so mad about it and frustrated, that I can't even get into the issues behind it, especially since I cannot find and fix the root of the problem. This thing is only 4 months old, so if it's dying, I'll be making some enemies. :boxing:

I'm clueless about this though.......aahhh fork it I'm going to sleep now :hehe: :bonk: I've been up all night with this and nothing is fixed, and it may even be worse! :cursing: So I must rest what few little semi-useful brain cells I have left :rolly: . I've already been trying to figure this out for a couple days now. I think I ended up with a cruddy burner. :grumble:

wow! i remember when you first got it, you were so psyched about it! if there is a circuit city up there there should be one you could get for abot $60.

Wow..... all I see are the emoticons..... :hehe: But if it turns out your burner is bad, I think they're about $80 for a dual layer burner at newegg.com. Im sure the regular burners are cheaper than that...Hope its useful..

niko2x wrote:wow! i remember when you first got it, you were so psyched about it! if there is a circuit city up there there should be one you could get for abot $60.

Well, it came w/ my new PC, and it DID work just fine until a few days ago. I have a warranty and stuff, but eh...I'm trying to avoid taking it in if I have to.

It seems to fail on every data DVD I try to make, but sometimes it works when I make a copy of a DVD half of the time, if I lower the speed. CD's burn with no problem though. Here's the stats in case anyone's interested or went through this with an NEC ND-1300a:

Nero 5.5 installed (installed this 2 months ago, worked fine w/ cd's, hadn't tried dvd's until Roxio was failing)
Roxio 6 installed (came preinstalled, yuck)
firmware 1.07 (flashed it last night to 1.09, no difference so far, dunno how to roll back to 1.07, I probably can't :mecry:)
DMA enabled


In Roxio: burn fails around 93% or just before leadout. "Unspecified error".
In Nero: Gets stuck for 2+ minutes and fails at 1% saying "Illegal disk error, error reading data, burn failed".

Everyone's telling me I'm using cheap/bad media. Well, if that's so, then why did it work the other day? I'm using the same spools. Fails on Fuji, Verbatim, and Ridata (ritek g04) if burning data disk. No changes were made prior to the problem, which is why I can't pinpoint the problem.

Oddly enough, last night my speeds in Roxio started being listed as 1.9x (2.6mb/s) and 3.9x (5.2mb/s) rather than 2x and 4x, not it's for every disk :crazy2:

I've been told these are possible problems: Nero and Roxio conflicting w/ each other (but both have been working for months now), burner dying (heh?? this thing is 4 months old!), firmware. I'll keep reading....but it makes me even more confused :sweat: If worse comes to worst, I'll just start burning a ton of CD's to back things up then take it in to be checked :grumble:

KouSeiya315 wrote:

Well, it came w/ my new PC, and it DID work just fine until a few days ago. I have a warranty and stuff, but eh...I'm trying to avoid taking it in if I have to.

It seems to fail on every data DVD I try to make, but sometimes it works when I make a copy of a DVD half of the time, if I lower the speed. CD's burn with no problem though. Here's the stats in case anyone's interested or went through this with an NEC ND-1300a:

Nero 5.5 installed (installed this 2 months ago, worked fine w/ cd's, hadn't tried dvd's until Roxio was failing)
Roxio 6 installed (came preinstalled, yuck)
firmware 1.07 (flashed it last night to 1.09, no difference so far, dunno how to roll back to 1.07, I probably can't :mecry:)
DMA enabled


In Roxio: burn fails around 93% or just before leadout. "Unspecified error".
In Nero: Gets stuck for 2+ minutes and fails at 1% saying "Illegal disk error, error reading data, burn failed".

Everyone's telling me I'm using cheap/bad media. Well, if that's so, then why did it work the other day? I'm using the same spools. Fails on Fuji, Verbatim, and Ridata (ritek g04) if burning data disk. No changes were made prior to the problem, which is why I can't pinpoint the problem.

Oddly enough, last night my speeds in Roxio started being listed as 1.9x (2.6mb/s) and 3.9x (5.2mb/s) rather than 2x and 4x, not it's for every disk :crazy2:

I've been told these are possible problems: Nero and Roxio conflicting w/ each other (but both have been working for months now), burner dying (heh?? this thing is 4 months old!), firmware. I'll keep reading....but it makes me even more confused :sweat: If worse comes to worst, I'll just start burning a ton of CD's to back things up then take it in to be checked :grumble:

I'm still guessing its the media brand. from what you mentioned, it looks like it has trouble writing the last part of the tracks. So, I guess if the data you are writing is small, there a chance it wont fail since it doesnt have to write to the problem tracks. Usually if it can write successfully on a lower speed but fails on higher speed setting, the problem is on the media. Anyway, one thing to do to fix the problem is to update the firmware but unless its the official firmware, it might ruin your warranty. The unofficial firmwares do support more cheap medias though...

KouSeiya315,

A few suggestions/questions:

-Have you disabled IMAPI on your system? If not try this (from Adobe's website).

10. Disable the IMAPI CD-Burning COM Service.
If Adobe Premiere Pro returns an error that the DVD burner is in use by another application, disable the IMAPI CD-Burning COM Service.

Note: Disabling the IMAPI CD-Burning COM Service disables the ability of Windows XP to natively burn CD-R/RWs.


To disable the IMAPI CD-Burning COM Service:
1. Choose Start > Settings > Control Panel, and then double-click Administrative Tools.
2. Double-click Services.
3. Right-click IMAPI CD-Burning COM Service and choose Properties.
4. Choose Disabled from the Startup Type menu.
5. Click Start, and then click OK.


Try to export an Adobe Premiere Pro project to DVD. If you're able to do so without error, you can reenable the IMAPI CD-Burning COM Service. To reenable the IMAPI CD-Burning COM Service, repeat steps 1-5, choosing Automatic from the Startup Type menu in step 4.

-have you installed anything new recently that might have changed a core driver needed for DVD burning?

-How much disk cache do you have? Check to make sure you have enough temp cahce space (since the programs can still store temp files on your system during the burn.

-Have you tried defragmenting and error checking your system to make sure that your files are optimized and that you don't have any disk errors at all?

Mr.ChoyBoi wrote:Wow..... all I see are the emoticons..... :hehe: But if it turns out your burner is bad, I think they're about $80 for a dual layer burner at newegg.com. Im sure the regular burners are cheaper than that...Hope its useful..

dual layer for only $80?!?!

Yep, I do believe its the NEC ND3500A.... I was suprised when I saw it too.... of course its OEM tho.... :hehe:

Mr.ChoyBoi wrote:Yep, I do believe its the NEC ND3500A.... I was suprised when I saw it too.... of course its OEM tho.... :hehe:

Wow you're right, the NEC ones are cheap! OEM doesn't bother me that much, still new. I don't need the box anyways :hehe: :hehe:

The only thing about dual layer though is that I don't want to dish out $5 for a DL DVD :hehe: :hehe:

For now.... I'd give it about 6 months and the cds will drop to about half or even the same price as the dvd-r's now....